Recently viewed items
Schneider APC Smart-UPS RT 10kVA 230V SRTG10KXLI
Model :SRTG10KXLI
SKU :
This item cannot be returned or exchanged
Cash on Delivery available
AED 17,970.00
Rate inclusive of VAT
Sold By : MEPKart
Fulfilled by Thomsun Industries
- Condition: New
Description for Schneider APC Smart-UPS RT 10kVA 230V SRTG10KXLI
Specifications
Lead time | Usually in Stock |
---|
Run time for load WEnter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down. Min-max: 1000-10000 W | |
---|---|
Max. Capacity Used The maximum percentage of UPS capacity used to support your specified load. | |
Main Input Voltage | 230 V |
Other Input Voltage | 220 V 240 V |
Main Output Voltage | 230 V |
Other Output Voltage | 220 V 240 V |
rated power in W | 10000 W |
Rated power in VA | 10000 VA |
output connection type | 2 IEC 60320 C13 1 IEC 60320 C19 |
Output connector type | Hard wire 3-wire (H N + E) 1 |
Battery type | Lead-acid battery |
Provided equipment | Smart UPS signalling RS-232 cable User manual |
Run Time | View Runtime Graph |
---|---|
Efficiency | View Efficiency Graph |
Number of battery filled slots | 0 |
Number of battery free slots | 0 |
Battery recharge time | 4 h |
Number of battery replacement quantity | 2 |
Additional information | Configurable for 220 : 230 or 240 nominal output voltage |
Battery voltage | +/- 96 V |
Battery charger power | 431 W rated |
Battery power in VAH | 1772 VAh runtime |
Battery life | 3…5 year(s) |
Replacement battery | APCRBC174 |
Battery option | SRTG192XLBP4 1 3564 VAh SRTG192XLBP4 2 5415 VAh SRTG192XLBP4 3 7378 VAh SRTG192XLBP4 4 9216 VAh |
Extended runtime | 1 |
Number of power module free slots | 0 |
---|---|
Number of power module filled slots | 0 |
Redundant | No |
Height | 21.7 cm |
---|---|
Width | 44 cm |
Depth | 68 cm |
Product weight | 101.44 kg |
Mounting preference | No preference |
Mounting mode | Rack-mounted with kit |
Two post mountable | 0 |
USB compatible | No |
Network frequency | 40...70 Hz auto-sensing |
---|---|
Number of input connectors | 1 hard wire 3-wire (1P + N + E) |
Input voltage limits | 160...285 V |
Maximum input current | 30 A |
Max short time withstand current | 40 kA |
Maximum configurable power in W | 10000 W |
---|---|
Harmonic distortion | Less than 2 % |
Output frequency | 50/60 Hz +/- 3 Hz sync to mains |
Crest factor | 3 : 1 |
UPS type | Double conversion online |
Wave type | Sine wave |
bypass type | Internal bypass (automatic and manual) |
Full load runtime | 00:03:30 10000 W |
Half load runtime | 00:11:00 5000 W |
Maximum configurable power in VA | 10000 VA |
Standards | EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018 |
---|
Ambient air temperature for operation | 0…40 °C |
---|---|
Relative humidity | 0…95 % non-condensing |
Operating altitude | 0...6600 ft |
Ambient air temperature for storage | -15…45 °C |
Storage Relative Humidity | 0…95 % non-condensing |
Storage altitude | 0.00…15240.00 m |
Acoustic level | 55 dB |
Heat dissipation | 2217.98 Btu/h |
IP degree of protection | IP20 |
Preinstalled device | Network management card 3 with environmental monitoring |
---|---|
Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency power off | Yes |
Surge energy rate | 600 J |
---|
Unit Type of Package 1 | PCE |
---|---|
Number of Units in Package 1 | 1 |
Package 1 Height | 41.4 cm |
Package 1 Width | 79 cm |
Package 1 Length | 59 cm |
Package 1 Weight | 103.46 kg |
Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
---|